Zuhause> Produkt-Liste> Overhead -Schnitttüren> Kalte Raum Wärme isolierte Schnitttür
Kalte Raum Wärme isolierte Schnitttür
Kalte Raum Wärme isolierte Schnitttür
Kalte Raum Wärme isolierte Schnitttür
Kalte Raum Wärme isolierte Schnitttür
Kalte Raum Wärme isolierte Schnitttür
Kalte Raum Wärme isolierte Schnitttür
Kalte Raum Wärme isolierte Schnitttür
Kalte Raum Wärme isolierte Schnitttür

Kalte Raum Wärme isolierte Schnitttür

$2000-700 /Set/Sets

Zahlungsart:L/C,T/T,Paypal,Western Union
Incoterm:FOB,CFR,CIF,EXW,FCA,DDU,Express Delivery
Minimum der Bestellmenge:1 Set/Sets
Transport:Ocean,Land,Air,Express
Hafen:SHANGHAI,NINGBO,TAICANG
Produkteigenschaften

MarkeKenvo -Tür

Garantieleistungen1 Jahr

Methode öffnenRolling Pull, Automatisch

TürtypGlas, Polymer

KundendienstTechnischer Online-Support, Kostenlose Ersatzteile, Rückgabe und Ersatz

HauptmaterialStahl

Fähigkeit Zur Technischen LösungGrafikdesign, 3D-Modelldesign, Gesamtlösung für Projekte

AnwendungsszenarioVilla, Warenhaus, Werkstatt, Bauernhaus, Abstellraum, Außen, Eintrag, Garage & Schuppen

DesignstilModern, Industriell, europäisch

HerkunftsortChina

Platz VerwendenIndustriell

OberflächenbearbeitungFertig

VielfaltEingangstüren, Garagentore, Industrietüren

TürmaterialAluminiumlegierung, Glas, Rostfreier Stahl, Stahl

Lifting WayStandard lifting, Vertical lifting, High lifting

Power Supply1-phase 220±10%V, or 3-phase 380±10%V

Power300W-1500W

Door Panel40mm, 50mm, 60mm PU sandwich panel

Running Speed30cm/s

Operation MethodControl buttons and Remote controls

Verpackung & Lieferung
Verkaufseinheiten : Set/Sets
Pakettyp : Karton oder Holzkiste
Bildbeispiel :
Herunterladen :
Industrielle Overhead -Abschnittstür
Abschnittstür mit Fernbedienungsbetrieb
Produktbeschreibung

In kalten Räumen oder Kühllager ist es wichtig, eine richtige Tür mit guter Wärmeisolierung zu wählen, um Wärmeverlust und Energiekosten zu senken. In einigen Bereichen kommt es zu Frequenzverkehr, die Waren durch Türen ein- und auszuschieben. Die Tür muss häufig geöffnet und in Zyklen geschlossen werden. In diesem Fall ist die automatische Overhead -Abschnittstür eine oberste Wahl. Es ist mit einer schnellen Laufgeschwindigkeit und kann in sehr hoher Frequenz funktionieren. Gleichzeitig ist die Türplatte stark thermisch isoliert, um den Wärmeverlust zu minimieren. Es ist eine perfekte Wahl für geschäftige Bereiche aller Arten von kalten Räumen, kühleren Räumen und Aufbewahrungsaufbewahrung.



cold room thermal insulated sectional door


In kalten Räumen muss es Gebiete zum Transport von Waren ein- und ausgeben. Die Temperatur in solchen Flächen liegt normalerweise zwischen -5 und +10 ° C, da zwischen Außentemperatur und Kalttemperatur ein Vorraum oder Pufferbereich. Overhead Sectional -Türen können in solchen Bereichen gut funktionieren. Es kann die Erfordernis der thermischen Isolierung und auch die Frequenzbewegung von Waren erfüllen.


 

Quick opening and closing

Running speed comparation:

Sectional door: 0.3m/s; 

Traditonal roller shutter door: 0.06-0.08m/s;

 

So, sectional doors are four times the speed of a traditional roller shutter door.  It opens and closed much faster. This bring several big benefits for cold rooms or refrigeration warehouse storage:

 

  • Improve work efficiency:  Workers or forklifts will no need wait long time in front of the door. The material handling speed in cold rooms is higher by at least 3 times than traditional roll up doors; 

  • Keep clean and hygiene: The fast running reduces the open time to only seconds in a cycle of passing the door. Thus much less outside air and dust will enter the cold rooms or refrigeration warehouse

  • Keep temperature inside cold rooms: Heat loss is reduced obviously by reducing open and closing time, very beneficial to keep cold and save energy cost in refrigeration warehouse storage.

 

High frequency working

 

In many cold rooms or refrigeration warehouse storage, it is quite busy for moving goods in 24 hours a day.  In such heavy traffic cold rooms, overhead sectional doors can meet the requirement of high frequency opening and closing. 

There is torsion spring balance system around top drive rod. After spring tightened, it can balance the weight of the door and reduce the load weight of motor. So its drive motor is always in a light-load working state. This is the reason why such overhead sectional doors can work continually in high frequency. No need worry its motor will overload and get burnt.  

 

Max work frequency: 800 open-close cycles per day. 

     Thermal insulated

 

Door panel is Double skin sandwich structure filled with highly thermal insulating polyurethane foam material.

.Total thickness: 40mm (KENVO also supply 50mm, 60mm or 75mm for special cold rooms or refrigeration warehouses, to realize better thermal insulation.). 

Two surface layer is 0.326mm galvanized steel plate. Middle is filled with high density fire 

 retardant polyurethane  foam. Foam Density: 45kg/m3. 

 

At the joint area, there is a special cold-bridge design, to avoid direct heat conduction through surface steel sheet. 

Thermal insulation ratio:   4.5W/m. h.

For this reason, loading dock overhead sectional doors will keep cold or cool temperature inside the warehouse, to save energy cost. This is quite useful in cold room or cool room warehouses of cold chain logistics. 

High air-tightness

 

All-around of the cold room overhead sectional door is covered with EPDM weather seal rubber. Such rubber can resist cold and chemical. It can keep in good shape after years.  This guarantee the high air-tightness of the whole door. It will prevent outside air and dust entering the room, and keep warehouse inside clean and hygiene. 

 Flexible design to fit all project sites

 

The cold room overhead sectional door can climb up in different ways to fit specific site situation of refrigeration warehouse inner ceiling height.   

Standard lift: For limited top space, the door will turn to the ceiling directly;

High lift:  The door can climb up the wall for some distance and then turn to the ceiling; 

 

Vertical lift: If the ceiling is high enough, the best way is to climb up complete to the top. 

 

Optionale Teile:

Sie können für Ihre Ladedock -Overhead -Abschnittstür klare Fenster oder MAN -Türen auswählen

  • Klares Fenster: Menschen können sehen, was an einer anderen Seite der Tür passiert. Dies kann die Sicherheit am Arbeitsplatz verbessern.

  • Kleine Manntür: Passen für große Türen, bei denen viele Arbeiter vorbeikommen. Dies kann die Verwendung der gesamten Abschnittstür verringern und ihr Arbeitsleben verbessern. (In den meisten Lagerhause -Ladedocks liegt die Docktür in geringer Größe von etwa 2,5 m*3 m. Für so kleine Türen sind keine kleinen Manntüren erforderlich.)

Technische Daten:

Applicable location: both interior and exterior
Max dimension:  10000mm wide*8000mm high      
Opening Speed:  0.3m/s   
Closing speed:   0.3m/s  
Wind resistance:  Beaufort scale 12 (32m/s) 
Power supply:  1-phase 220±10%V,50/60HZ, or  1-phase 380±10%V,50/60HZ
Protection level of electric:  IP54 
Frame material:  Galvanized steel 
Thickness of panel: 40mm thick or 50mm thick
Density of PU foam 45kg/m³ 
Sound insulation: 24  dB
Thermal insulation: 0.38 W/m°C
Water tightness: 30 Pa
Power:  300W to 1500W

Zuhause> Produkt-Liste> Overhead -Schnitttüren> Kalte Raum Wärme isolierte Schnitttür

Copyright ©2024 SHANGHAI KENVO DOOR CO.,LTDAlle Rechte vorbehalten

Anfrage versenden
*
*

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

senden